Tuesday, April 15, 2008

Typical Examination Questions based on Element 7

1.

(a) Explain the methods of heat transfer that can cause the spread of fire.

(b) Outline the main requirements of a safe means of escape from a building.

(8)

(12)

(a) Methods are Conduction (e.g. through a plastic coffee cup), convection (e.g. up a chimney), radiation (e.g. from a fire) and direct burning (e.g. of any fuel such as wood)

(b) Emphasis on fire resistant materials for escape route walls, ceilings and doors. Easy exit provisions with doors opening in direction of travel and self-closing. Notices identifying, and lighting of, escape routes. Good housekeeping on routes to ensure no obstacles and no flammable substances on routes. Distances form workstations into an escape route. A safe assembly point. Fire alarm and extinguisher stations on route towards safe routs.

2.

(a) Outline the main factors to be considered in the siting of fire extinguishers.

(b) Outline the inspection and maintenance requirements for fire extinguishers in a workplace.

(4)

(4)

(a) Accessibility, proximity to exits, travel distances, situated at fire points, protection when required from weather or other sources of damage.

(b)


Inspection should be routinely carried out to ensure extinguishers are in place, have not been discharge, damaged, have pins missing or, because of a change in local conditions or work are unsuitable for the fires they are meant to deal with.

Maintenance is something more extensive and usually involves annual tests by a competent person according to the manufacturer's instructions in order to ensure the integrity of the extinguisher, with the removal and replacement of equipment found faulty.

3.

List EIGHT features of a safe means of escape from a building in the event of a fire.

(8)

Issues include; at least two escape routes available in two directions from work-areas taking account of escape distances from workplace to protected zone. The fire resistant integrity of escape routes. The ability of fire doors to be easily opened in direction of escape and to self close. The need to ensure escape routes are kept free from obstructions. Appropriate siting and marking of assembly points. Fire escape notices of the appropriate type. Lighting of escape routes. Suitability for people with special needs.

4.

(a) Outline TWO advantages and TWO disadvantages of using hose reels as a means of extinguishing fires.

(b) Outline the main factors to consider in the siting of hose reels.

(4)


(4)

(a) Advantages

(i) A continuous supply of water that is of a greater force and quantity than an extinguisher has.

(ii) User does not need to be close to the fire.

Disadvantages

  1. Effort required to position and use a hose,
  2. The hose can compromise smoke barriers by keeping doors ajar and water is not suitable for use on all fires.

(b) Issues are; accessibility (should be on, or adjacent to, an escape route e.g. on a stairwell). Recessing where possible into walls to avoid blocking escape routes. Possible sealed hole from hose to pass from stairwell into offices etc. Positioned to give maximum coverage in terms of the length of hose, where frost will not cause the water to freeze and they will not be subject to misuse or vandalism.

5.

(a)
With reference to the fire triangle, outline TWO methods of extinguishing fires.

(b)
State the ways in which persons can be harmed by fire in work premises.

(4)


(4)

(a) Examples: starvation (removing the fuel). Smothering (Eliminating oxygen). Cooling (pouring water on to the fire) or by interfering chemically with the combustion process.

(b) Harmed by being burnt, inhaling smoke, by depleted oxygen supply, falling parts of a building or by being crushed or suffering some other injury in trying to escape.

6.

(a)
Identify FOUR types of ignition sources that may lead to a fire in the workplace.

(b)
Outline ways of controlling each of the ignition points identified in (a).

(4)


(4)

(a) Ignition sources include: Smoking, hot work and surfaces, electricity, reactive chemicals, and arson.

(b) Control could include:

Smoking - ban or restriction on smoking.

Hot work and surfaces -ensuring no combustible materials are in the vicinity of hot work.

Electricity - ensuring no over-loading of circuits and proper care and maintenance of electrical equipment.

Reactive chemicals - control through work practices and procedures including storage.

Arson - having good security arrangements including restriction of strangers in building and diligent supervision.



No comments:

Post a Comment